Hello everyone,

we have generate with the wizard a web-service using the function module BAPI_CONTROL_RECIPE_GET_LIST. Then we have generated with SOAMANAGER the end point. As test, we have used a web-service explorer of Eclispe and we can retrieve without problems the data.



Then we wanted to generate the web-servcie client with Eclipse Galileo (3.5.0) wiith the server GlassFish v2.1 Java EE 5 we first installed the WSIT jars, in order to support WS-RM protocol
We have started the generation based on the document obtainend within the soamanager under the "Open WSDL document for selected binding" link.



We have tried it several times and we always got the following error is:



IWAB0399E Error in generating Java from WSDL: WSDLException (at /wsdl:definitions/wsdl:portType/wsp:Policy):

faultCode=INVALID_WSDL: Encountered unexpected element 'Policy'.: <br>    WSDLException (at /wsdl:definitions/wsdl:portType/wsp:Policy): faultCode=INVALID_WSDL: Encountered unexpected element 'Policy'.:

at com.ibm.wsdl.util.xml.DOMUtils.throwWSDLException(Unknown Source)

at com.ibm.wsdl.xml.WSDLReaderImpl.parsePortType(Unknown Source)

at com.ibm.wsdl.xml.WSDLReaderImpl.parseDefinitions(Unknown Source)

at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source)

at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source)

at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source)

at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:516)

at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:495)

at org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:361)

at java.lang.Thread.run(Unknown Source)




Do you know if we took the right document in order to generate the web-service client? Do we need to have some specifics settings in the configurations of th endpoint? (provider security, transport settings, etc...?)



If needed, or if someone would be nice enough to try to generate it on its side, I can post here the whole wsdl document, but due to its length, I first wait your comments.




Thanks a lot in advance for your feed-back

best regards
Pierre-André

-

-

addtions:

maybe this should have been better posted within the forum Service-Oriented Architecture than standards?



I forgot to mention the following threads, which seems to me to be somehow in this direction. But I do not get really how I could use them, or how is is releated.

Edited by: Pierre-andre Jacquod on Sep 23, 2009 4:02 PM

Dear experts,

can anyone explain to me the difference between them?

1.) F-02 vs FB50

2.) F-22 vs FB70 &

3.) F-43 vs FB60

Thanks.

It looks like someone else posted this same question, but did not get a response. 

Does SAP support GS1-128 barcodes using the AI (application identifiers)? 

We have a requirement from a customer to begin sending shipping documents with a single barcode. The barcode will include several different fields.  Each field will be preceded by its application identifier.

What I am asking is can SAP construct this barcode for us?  Or do we have to create the string ourselves?

hello

i hope this is the right category to post my problem

i want to use the service "customerCRMChangeRequestConfirmation_In"

but i get this error message: "Error getting response; java.net SocketTimeoutException: Read timed out.

on my search to fix this problem i found the SAP Note 826419.

with following advice:

===========================================================================================

Version NW 7.10

• Using NetWeaver Administrator

          o For standard Web service deployable proxy:

            1.  Open SAP NetWeaver Administrator in a browser: http:// "Web Services Administration".

            3.  Choose "Proxy Definitions by Name" and click "GO".

            4.  Select the proxy you want to configure.

            5.  Choose the "Configuration" tab.

            6.  Choose the "Logical Ports" tab.

            7.  Select the logical port you want to configure and choose "Edit".

            8. Choose the "Transport Settings" tab.

            9. Edit the "Max wait-time for HTTP response (in milliseconds)" field.

            10. Click "Save" to save the settings.

============================================================================================

but in my Transport Settings are no "May wait-Time for HTTP response-field"

what is the problem? i have an SAP CRM IDES System with Netweaver 7.1

do I need to install an sp?

I also found this solution for my read time out problem:

http://wiki.sdn.sap.com/wiki/display/TechTSG/%28WSR%29Problems-P01

but this solution with "Visual Administrator" is for java stack, right?

thank you for your help!

kind regards

sven möller

After attending the GS1 conference in Chicago two weeks ago and presenting the existing GLN functionality to GS1 staff and several U.S. Healthcare customers, the following requirements were identified and submitted via a Business Case:

Although we provide basic GLN functionality in standard ERP and IS-H, meeting customer requirements for the GLN Sunrise will require immediate enhancements in standard ERP (and IS-H?) and development in SRM.   In the future, improved GLN integration among ERP, SRM, and AII will be required.

Required Enhancements u2013 by October 2010 (to allow sufficient time to implement, test, and correct)

1. GLN Table (transaction EANGLN): support additional business objects for GLNs

    - Storage Location (V_T001L-LGORT, with referenced address in table ADDR1_DATA), for Ship-to  Locations u2013 the same as

      IS-H prototype function, which recognized the need for this level u2013 at a lower-level plant hierarchy.  Storage location GLNs

      need to override the plant GLN as the Ship-to location.

    - Deliver-to-Locations (overrides Plant and supplements Ship-to Locations) -- optional, but desirable; will be required in near-

     future; this would be 4th N1 segment on the 850 IDoc

    - Warehouse (V_T3001-LGNUM)-- linked to plant/Storage Location u2013 overrides plant

    - Multiple Vendor GLNs u2013 two Vendor GLNs (Order-from and Pay-to) are required, per GS1 standards, with Return-to as a

     recommended third GLN. 

        o This means that the current single Vendor GLN (maintained in the Vendor Master as three concatenated fields) is not

          sufficient.

    - Customer: Manufacturers, distributors, GPOs, 3PLs, and other supply-side customers require support of multiple Customer

      locations for Customer u2013 Buyer, Ship-to, Deliver-to, and Bill-to u2013 since the PO will contain all four GLNs

        o Same for Sales Orders, Order Acknowledgements, ASNs, invoices, and other supplier-outbound documents.

        o This means that the current single Customer GLN (maintained in the Customer Master as three concatenated fields) is not

            sufficient

2. SRM and Supplier Self-Service (both ERP and SRM) support for GLNs, including SRM ability to replicate GLNs from ERP

   (EANGLN and/or VENDORGLN and/or CUSTGLN) into similar SRM tables that are accessed by SRM procurement, receipt,

    supplier self-service, invoicing, and sourcing functions

3. The program populates IDocs only; we need to add the GLN on numerous transactions

    - ERP

        o Create, Change Display PO (ME21N, ME22N, ME23N)

        o Goods Receipt  (MIGO and MB1A)

        o Maintain Service Entry Sheet (ML81N)

        o Print/Transmit Service Entry Sheet (ML83)

        o PO Confirmation/Acknowledgement

        o Monitor Order Acknowledgements (ME92F)

        o Create, Change, Display Inbound Delivery (VL31N, 32N, 33N)

        o Create, Change, Display Outbound Delivery with ref to Sales Order (VL01N, VL02N, VL03N)

        o Create , Change, Display, Cancel Invoice  (MIRO, MIR4, MR8M)

        o Evaluated Receipt Settlement -- ERS (MRRL)

        o Consignment and  Pipeline Settlement  (MRKO)

        o Address Maintenance (MEAN)

        o Export Service Data (ML86)

        o Import Service Data (ML87)

3. SRM

        o Process Purchase Order (BBP_POC)

        o Enter Purchase Order Response (BBPPCO02)

        o Process Purchase Order Response (BBPPCO01)

        o Confirm Goods/Services (BBPCF02)

        o Confirm Goods/Services  Centrally (BBP_CF03)

        o Edit Invoice/Credit Memo(BBPIV02)

        o Edit Invoice/Credit Memo Centrally (BBPIV03)

        o Edit Internal Addresses (BBPADDRINTC)

        o Edit Addresses (BBPADDRINVT) u2013 for business partners

        o Edit Addresses (BBPADDREXT)

        o Manage Business Partners (BBPMAININT)

4. SRM-generated 850 IDoc

5. Printouts and reports (PO Print and FAX, plus others to be identified in Functional Specification)

6. Sales Order: Multiple Customer GLNs (for ship-tos and deliver-tos -- from PO)

7. Terminology u2013 both GS1 and several customers do not like the terms EAN, UCC, and ILN, and urge us to use GS1-standard

    terms "GLN" and "GTIN."  Perhaps the use of GuiXT will suffice.

For 2011, additional enhancements will be required

Edited by: Jonathan Arck on May 5, 2010 11:13 PM

Dear experts,

can anyone explain to me the difference between them?

1.) F-02 vs FB50

2.) F-22 vs FB70 &

3.) F-43 vs FB60

Thanks.

Hi Experts,

Our production ECC 6.0 Application server instance work process ended by itself, and this is the second time it happens;

Our Platform is;

Windows 2003 server, ECC 6.0, SQL Server 2005,

Kernel Release : 150

here are the sm21, dev_disp, dev_icm, dev_rd, dev_w0 logs;

How can i prevent this error,

Regards

sm21 logs;

......

03:02:49 RD                                  Q0  I Operating system call recv failed (error no. 10054)

03:02:49 RD                                  Q0  I Operating system call recv failed (error no. 10054)

03:02:49 RD                                  Q0  I Operating system call recv failed (error no. 10054)

03:02:49 RD                                  Q0  I Operating system call recv failed (error no. 10054)

03:02:50 RD                                  S3  0 SAP gateway was closed

03:03:00 DP                                  Q0  M Message server disconnected

03:03:00 DP                                  Q0  5 Stop SAP System, Dispatcher Pid 28

-

dev_disp;

Tue Aug 12 21:15:12 2008

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 7 / sock 164

    (SI_ECONN_BROKEN/10054; I4; ST; 192.168.0.211:1592) [nixxi.cpp    4424]

Network error of client T28, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3

Client address of T28 is 192.168.0.211(192.168.0.211)

***LOG Q04=> DpRTmPrep, NiBufReceive (11539HASANS 28 EnAltDepo ) [dpxxdisp.c   11577]

RM-T28, U11539, 100       HASANS, EnAltDepo, 21:14:47, M1, W1,     , 3/1

Wed Aug 13 03:02:48 2008

DpSigInt: caught signal 2

DpHalt: shutdown server >sapapp1_KEC_00                          < (normal)

DpModState: change server state from ACTIVE to SHUTDOWN

Stop work processes

Wed Aug 13 03:02:49 2008

Stop gateway

Stop icman

Terminate gui connections

wait for end of work processes

wait for end of gateway

waiting for termination of gateway ...

Wed Aug 13 03:02:50 2008

wait for end of icman

waiting for termination of icman ...

Wed Aug 13 03:02:51 2008

waiting for termination of icman ...

Wed Aug 13 03:02:52 2008

waiting for termination of icman ...

Wed Aug 13 03:02:53 2008

waiting for termination of icman ...

Wed Aug 13 03:02:54 2008

waiting for termination of icman ...

Wed Aug 13 03:02:55 2008

waiting for termination of icman ...

Wed Aug 13 03:02:56 2008

waiting for termination of icman ...

Wed Aug 13 03:02:57 2008

waiting for termination of icman ...

Wed Aug 13 03:02:58 2008

waiting for termination of icman ...

Wed Aug 13 03:02:59 2008

DpStartStopMsg: send stop message (myname is >sapapp1_KEC_00                          <)

DpStartStopMsg: stop msg sent

Wed Aug 13 03:03:00 2008

DpHalt: sync with message server o.k.

detach from message server

***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12213]

MBUF state OFF

MBUF component DOWN

cleanup EM

***LOG Q05=> DpHalt, DPStop ( 2804) [dpxxdisp.c   10461]

-

dev_rd ;

Thu Aug 07 10:51:11 2008

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 13 / sock 464

    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3707) [nixxi.cpp    4424]

Wed Aug 13 03:02:34 2008

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 43 / sock 468

    (SI_ECONN_BROKEN/10054; I4; ST; 192.168.0.201:2898) [nixxi.cpp    4424]

Wed Aug 13 03:02:49 2008

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 14 / sock 440

    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2503) [nixxi.cpp    4424]

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 5 / sock 44

    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4669) [nixxi.cpp    4424]

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 38 / sock 52

    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2508) [nixxi.cpp    4424]

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 3 / sock 492

    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2421) [nixxi.cpp    4424]

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 8 / sock 420

    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2480) [nixxi.cpp    4424]

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 9 / sock 408

    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2481) [nixxi.cpp    4424]

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 10 / sock 396

    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2482) [nixxi.cpp    4424]

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 11 / sock 384

    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2483) [nixxi.cpp    4424]

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 37 / sock 72

    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3043) [nixxi.cpp    4424]

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 41 / sock 40

    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2657) [nixxi.cpp    4424]

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 4 / sock 480

    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3318) [nixxi.cpp    4424]

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 40 / sock 48

    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3462) [nixxi.cpp    4424]

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 13 / sock 464

    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4059) [nixxi.cpp    4424]

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 12 / sock 372

    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2862) [nixxi.cpp    4424]

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 15 / sock 340

    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2548) [nixxi.cpp    4424]

Wed Aug 13 03:02:50 2008

***LOG S30=> GwStopGateway, gateway stopped () [gwxxrd.c     14656]

-

dev_icm ;

-

trc file: "dev_icm", trc level: 1, release: "700"

-

sysno      00

sid        KEC

systemid   562 (PC with Windows NT)

relno      7000

patchlevel 0

patchno    148

intno      20050900

make:      multithreaded, Unicode, 64 bit, optimized

pid        3012

[Thr 3008] started security log to file dev_icm_sec

[Thr 3008] ICM running on: sapapp1.koyuncu.com.tr

[Thr 3008] MtxInit: 30001 0 2

[Thr 3008] IcmInit: listening to admin port: 65000

[Thr 3008] DpSysAdmExtCreate: ABAP is active

[Thr 3008] DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active

[Thr 3008] Thu Jul 10 09:14:17 2008

[Thr 3008] DpShMCreate: sizeof(wp_adm)          42016     (1616)

[Thr 3008] DpShMCreate: sizeof(tm_adm)          5652128     (28120)

[Thr 3008] DpShMCreate: sizeof(wp_ca_adm)          24000     (80)

[Thr 3008] DpShMCreate: sizeof(appc_ca_adm)     8000     (80)

[Thr 3008] DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080

[Thr 3008] DpShMCreate: sizeof(comm_adm)          552080     (1088)

[Thr 3008] DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0

[Thr 3008] DpShMCreate: sizeof(slock_adm)          0     (104)

[Thr 3008] DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

[Thr 3008] DpShMCreate: sizeof(file_adm)          0     (72)

[Thr 3008] DpShMCreate: sizeof(vmc_adm)          0     (1864)

[Thr 3008] DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)

[Thr 3008] DpShMCreate: sizeof(gw_adm)     48

[Thr 3008] DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000001FB0050, size: 6365440)

[Thr 3008] DpShMCreate: allocated sys_adm at 0000000001FB0050

[Thr 3008] DpShMCreate: allocated wp_adm at 0000000001FB2150

[Thr 3008] DpShMCreate: allocated tm_adm_list at 0000000001FBC570

[Thr 3008] DpShMCreate: allocated tm_adm at 0000000001FBC5D0

[Thr 3008] DpShMCreate: allocated wp_ca_adm at 0000000002520470

[Thr 3008] DpShMCreate: allocated appc_ca_adm at 0000000002526230

[Thr 3008] DpShMCreate: allocated comm_adm at 0000000002528170

[Thr 3008] DpShMCreate: system runs without slock table

[Thr 3008] DpShMCreate: system runs without file table

[Thr 3008] DpShMCreate: allocated vmc_adm_list at 00000000025AEE00

[Thr 3008] DpShMCreate: allocated gw_adm at 00000000025AEE80

[Thr 3008] DpShMCreate: system runs without vmc_adm

[Thr 3008] DpShMCreate: allocated ca_info at 00000000025AEEB0

[Thr 3384] IcmProxyWatchDog: proxy watchdog started

[Thr 3008] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.

[Thr 3008] IcmCreateWorkerThreads: created worker thread 0

[Thr 3008] IcmCreateWorkerThreads: created worker thread 1

[Thr 3008] IcmCreateWorkerThreads: created worker thread 2

[Thr 3008] IcmCreateWorkerThreads: created worker thread 3

[Thr 3008] IcmCreateWorkerThreads: created worker thread 4

[Thr 3008] IcmCreateWorkerThreads: created worker thread 5

[Thr 3008] IcmCreateWorkerThreads: created worker thread 6

[Thr 3008] IcmCreateWorkerThreads: created worker thread 7

[Thr 3008] IcmCreateWorkerThreads: created worker thread 8

[Thr 3008] IcmCreateWorkerThreads: created worker thread 9

[Thr 3428] IcmWatchDogThread: watchdog started

[Thr 3432] *** WARNING => HttpPlugInInit: Parameter icm/HTTPS/trust_client_with_issuer or icm/HTTPS/trust_client_with_subject not set => do not trust any intermediary

X.509 cert data will be removed from header [http_plg.c   720]

[Thr 3432] ISC: created 400 MB disk cache.

[Thr 3432] ISC: created 50 MB memory cache.

[Thr 3432] HttpSubHandlerAdd: Added handler HttpCacheHandler(slot=0, flags=12293) for /:0

[Thr 3432] HttpExtractArchive: files from archive E:\usr\sap\KEC\D00\exe/icmadmin.SAR in directory E:/usr/sap/KEC/D00/data/icmanroot are up to date

[Thr 3432] HttpSubHandlerAdd: Added handler HttpAdminHandler(slot=1, flags=4101) for /sap/admin:0

[Thr 3432] CsiInit(): Initializing the Content Scan Interface

[Thr 3432]            PC with Windows NT (mt,unicode,SAP_CHAR/size_t/void* = 16/64/64)

[Thr 3432] CsiInit(): CSA_LIB = "E:\usr\sap\KEC\D00\exe\sapcsa.dll"

[Thr 3432] Thu Jul 10 09:14:18 2008

[Thr 3432] HttpSubHandlerAdd: Added handler HttpAuthHandler(slot=2, flags=12293) for /:0

[Thr 3432] HttpSubHandlerAdd: Added handler HttpSAPR3Handler(slot=3, flags=1052677) for /:0

[Thr 3432] Started service 8000 for protocol HTTP on host "sapapp1.koyuncu.com.tr"(on all adapters) (processing timeout=60, keep_alive_timeout=30)

[Thr 3432] Thu Jul 10 09:14:24 2008

[Thr 3432] *** WARNING => IcmNetCheck: NiAddrToHost(10.0.0.1) took 6 seconds [icxxman.c    4578]

[Thr 3432] *** WARNING => IcmNetCheck: 1 possible network problems detected - please check the network/DNS settings [icxxman.c    4634]

[Thr 3008] Tue Jul 22 16:47:29 2008

[Thr 3008] *** WARNING => IcmMsgProcess: connection to WP 1 broken (rc=-8,nirc=-6)

[Thr 3008] Tue Jul 22 16:49:43 2008

[Thr 3008] *** WARNING => IcmMsgProcess: connection to WP 2 broken (rc=-8,nirc=-6)

[Thr 3008] Wed Jul 23 15:06:44 2008

[Thr 3008] *** WARNING => IcmMsgProcess: connection to WP 1 broken (rc=-8,nirc=-6)

[Thr 3008] Wed Jul 23 15:23:34 2008

[Thr 3008] *** WARNING => IcmMsgProcess: connection to WP 1 broken (rc=-8,nirc=-6)

[Thr 3008] Wed Jul 23 16:54:47 2008

[Thr 3008] *** WARNING => IcmMsgProcess: connection to WP 2 broken (rc=-8,nirc=-6)

[Thr 3008] Thu Aug 07 09:50:19 2008

[Thr 3008] *** WARNING => IcmMsgProcess: connection to WP 0 broken (rc=-8,nirc=-6)

[Thr 3384] Wed Aug 13 03:02:58 2008

[Thr 3384] IcmProxyWatchDog: Shutdown request received

[Thr 3384] *** IcmProxyWatchDog: exit thread ***

[Thr 3428] Wed Aug 13 03:02:59 2008

[Thr 3428] IcmWatchDogThread: Shutdown request received

[Thr 3428] *** IcmWatchDogThread: exit thread ***

[Thr 3008] IcmLoop: Shutdown request received

[Thr 3008] Deactivated service 8000 for protocol HTTP on host: "sapapp1.koyuncu.com.tr"(on all adapters) (timeout=30)

[Thr 3008] Deactivated service 0 for protocol SMTP on host: "sapapp1.koyuncu.com.tr"(on all adapters) (timeout=30)

[Thr 3008] Removed service 8000 for protocol HTTP on host: "sapapp1.koyuncu.com.tr"(on all adapters) (timeout=30)

[Thr 3008] Removed service 0 for protocol SMTP on host: "sapapp1.koyuncu.com.tr"(on all adapters) (timeout=30)

[Thr 3008] *** ICM shutdown completed (pid: 3012) ***

-

dev_w0

A Mon Aug 11 09:32:57 2008

A  GENER starting inline generation: AQA0SYSTQV000006ZFI_MBL_001=== (reason: explicit generation).

A 

A Mon Aug 11 09:35:51 2008

A  GENER starting remote generation: /1BCDWB/SAPLIQ000000000079 (requested by W1).

M 

M Mon Aug 11 11:08:35 2008

M  *** WARNING => ThSndDelUser: delete client/user 100/HIKMETB      (T100) on server sapapp1_KEC_00     

M 

M Mon Aug 11 11:40:23 2008

M  *** WARNING => ThSndDelUser: delete client/user 100/MURATU       (T81) on server sapapp2_KEC_00     

M 

M Mon Aug 11 11:51:37 2008

M  *** WARNING => ThSndDelUser: delete client/user 100/HIKMETB      (T28) on server sapapp1_KEC_00     

M 

M Mon Aug 11 12:21:53 2008

M  *** WARNING => ThSndDelUser: delete client/user 100/HIKMETB      (T99) on server sapapp1_KEC_00     

A 

A Mon Aug 11 22:28:59 2008

A  GENER starting remote generation: SAPL0F21 (requested by W1).

M 

M Tue Aug 12 09:47:58 2008

M  *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_GUI [pfxxstat.c   4133]

M 

M Tue Aug 12 15:34:33 2008

M  ***LOG US1=> Login, Wrong Password (UMITK ) [sign.c       4523]

M 

M Wed Aug 13 03:02:48 2008

M  in_ThErrHandle: 1

M  ThIErrHandle: new stat of W0 is WP_SHUTDOWN   

M  ThIErrHandle: I'm during shutdown

M  PfStatDisconnect: disconnect statistics

M  Entering ThSetStatError

M  ThCallDbBreak: use db_sqlbreak

C  SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 1

M  ThIErrHandle: don't try rollback again

M  ThShutDownServer: shutdown server

M  PfStatIndInit: Initializing Index-Record

M  PfWriteIntoFile: copied shared buf (0 bytes) to local buf

M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)

M  Entering ThReadDetachMode

M  call ThrShutDown (1)...

B  Disconnecting from ALL connections:

B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         

B  000 000 R/3              000000000 INACTIVE     NO  YES NO  000 255 255 20080807 095145 SAPDB          

B 

B Wed Aug 13 03:02:49 2008

B  Disconnected from connection 0

B  statistics db_con_commit (com_total=252484, com_tx=21560)

B  statistics db_con_rollback (roll_total=984, roll_tx=11)

M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 4192) [dpnttool.c   333]

-

Hi

I want to Register sap router.how to register on sap marketplace as well what are the mandatory step by step what is URL  and what to write to sap while registering and path where we generate the oss massage for sap to register static Ip for service market place

and procedure for confining sap router step by step

thanks

Dear experts,

can anyone explain to me the difference between them?

1.) F-02 vs FB50

2.) F-22 vs FB70 &

3.) F-43 vs FB60

Thanks.

@ hi all,

i'm new to the sap basis, in our PRD system i am getting an error while executing t-code st04,

Synonyms missing: Please run initialization script as per SAP-note 706927.

what is dat problem,

os-sun solaris

db-oracle

ecc 6.0 ehp4

My company has never implemented 1042 withholding tax and now we have request to do that.  They also want me to turn the extended withholding tax on so we can post multiple tax codes to one invoice.  I have ran the conversion and I have multiple errors.  Does anyone have a list of activities and configuration that needs to be completed when turning this extended withholding tax on.

Thank you,

Rhonda

Message was edited by: Rhonda  Evans

hello

i hope this is the right category to post my problem

i want to use the service "customerCRMChangeRequestConfirmation_In"

but i get this error message: "Error getting response; java.net SocketTimeoutException: Read timed out.

on my search to fix this problem i found the SAP Note 826419.

with following advice:

===========================================================================================

Version NW 7.10

• Using NetWeaver Administrator

          o For standard Web service deployable proxy:

            1.  Open SAP NetWeaver Administrator in a browser: http:// "Web Services Administration".

            3.  Choose "Proxy Definitions by Name" and click "GO".

            4.  Select the proxy you want to configure.

            5.  Choose the "Configuration" tab.

            6.  Choose the "Logical Ports" tab.

            7.  Select the logical port you want to configure and choose "Edit".

            8. Choose the "Transport Settings" tab.

            9. Edit the "Max wait-time for HTTP response (in milliseconds)" field.

            10. Click "Save" to save the settings.

============================================================================================

but in my Transport Settings are no "May wait-Time for HTTP response-field"

what is the problem? i have an SAP CRM IDES System with Netweaver 7.1

do I need to install an sp?

I also found this solution for my read time out problem:

http://wiki.sdn.sap.com/wiki/display/TechTSG/%28WSR%29Problems-P01

but this solution with "Visual Administrator" is for java stack, right?

thank you for your help!

kind regards

sven möller

Hi All,

we get user requirement for User Authentication to SAP ECC (ABAP) Stack, we tried setting User Synchronization with LDAP tcode until we can create user automatically from LDAP server

the problem are :

1. we are confuse, how to mapping attribute between SAP and LDAP about "password"
2. status of password is deactivate at SU01
3. can we logon to SAP with LDAP password automatically by runtime?

as far we read many article, LDAP is very limited function, this tcode only to User Synchronization without Password.

please help

regards,

gochi

hi can any one tell me about lock box...

thanks

sadaa

Hi All,

we get user requirement for User Authentication to SAP ECC (ABAP) Stack, we tried setting User Synchronization with LDAP tcode until we can create user automatically from LDAP server

the problem are :

1. we are confuse, how to mapping attribute between SAP and LDAP about "password"
2. status of password is deactivate at SU01
3. can we logon to SAP with LDAP password automatically by runtime?

as far we read many article, LDAP is very limited function, this tcode only to User Synchronization without Password.

please help

regards,

gochi

Hi

I want to Register sap router.how to register on sap marketplace as well what are the mandatory step by step what is URL  and what to write to sap while registering and path where we generate the oss massage for sap to register static Ip for service market place

and procedure for confining sap router step by step

thanks